×

tangential force meaning in English

切线力

Examples

  1. Each of circular dishes is subjected to the action of a tangential force .
    每个圆盘都受到切向力的作用。
  2. Due to the interstitial fluid between the partials , the solutions of the pressure and tangential force between the two granules are the theoretical foundation of the wet granular discrete element method
    当颗粒之间有法向或切向相对运动时,由于存在填隙流体,颗粒之间产生的法向的挤压力和切向阻力,是湿颗粒离散元法的理论基础。
  3. The measured tangential force , tangential inertial force and normal vibration acceleration are decomposed using a discrete wavelet transform . the relation among these three dynamics state variables is investigated
    利用小波变换技术对测量的切向力、切向惯性力和法向振动加速度进行分解,对这些动力学变量之间的相互关系进行了深层次的研究。
  4. This research was also supposed to provide a valuable reference for the construction of 500kv eastern hangzhou transformer substation project . to guarantee the rationality of the torsion and bending load application , a set of experimental equipments was transformed from a traditional one by exerting tangential force on the brim of the fan board and conducting broad - billed roller application . in the actually fulfilled experiments on the capabilities of the members under different ratios of torsion and bending , the equipments proved to be well qualified in load applying to large - tonnage members
    试验中,为保证扭转及弯矩荷载施加的合理性,在浙江大学工程结构试验室原有的加载设备的基础上,分别采用在扇形板边缘施加切向力和宽轴承滚轴加载的方法,改造并调试出一套可专门用于大吨位构件施加扭转荷载及组合作用的试验设备,并利用这套设备进行了离心钢管混凝土构件在不同弯扭比的组合作用下的试验研究。
  5. In contrast , taken as a contact problem , the principal characters of the interfaces can be reflected : ( 1 ) the contact interface is of shear strength which implies that a generic pair of contact points on the interface will displace coincidentally if the tangential force at this point has not reached the limit resistance , else , relative slide between the points will occur along the tangential direction . ( 2 ) no matter the relative slide occurs or not , the contact bodies cannot invade each other in any wise
    同时指出,将桩土相互作用按接触问题来处理,可以更好地反映出该接触面的主要力学特征,即: ( 1 )接触面具有相应的“抗剪强度” ,即当接触面上的某一点处的切向应力小于该点处的抗剪强度时,该处桩土共同变形;达到其抗剪强度时,则沿切向发生滑动; ( 2 )在整个变形过程中,桩与土不能互相侵入。
More:   Next

Related Words

  1. tangential servo
  2. tangential vane
  3. tangential resistance
  4. tangential hobbing
  5. tangential support
  6. tangential feed
  7. tangential admission
  8. tangential speed
  9. tangential irradiation
  10. tangential property
  11. tangential focal lines
  12. tangential focus
  13. tangential form grinding
  14. tangential frost-heave force
PC Version

Copyright © 2018 WordTech Co.